The XP95A Sounder Beacon Base is a loop-powered sounder and beacon combined with a standard Intelligent Mounting Base. It is used to signal a fire alarm in enclosed areas. The Sounder Beacon Base can be used either with a detector fitted or with a cap for operation as a stand-alone alarm device.
XP95A Sounder Visual Indicator Base
Distributed Module Placement
XP95 uses a ‘central intelligence’ system where all the decisions are made by the control panel. Each detector is addressed using XPERT Card and supplied with the mounting bases. The XP95A product line includes an ionization detector, a photo-electric detector, a heat detector, a multisensor, an isolator and a series of modules.
Highly Survivable
The XP95A Sounder Visual Indicator Base is a loop-powered sounder and visual indicator combined with a standard Intelligent mounting base for indoor use only. It is used to sound an audible signal in enclosed areas. It is not for use as evacuation notification. The XP95A Sounder Visual Indicator Base can be used either with a detector fitted or with a cap for operation as a standalone alarm device.
The XP95A Sounder Beacon Base is a loop-powered sounder and beacon combined with a standard Intelligent Mounting Base. It is used to signal a fire alarm in enclosed areas. The Sounder Beacon Base can be used either with a detector fitted or with a cap for operation as a stand-alone alarm device.
45681-525 – XP95A Sounder Visual Indicator Base – Yellow LED
45681-526 – XP95A Sounder Visual Indicator Base – Red LED
• Two volume ranges 53-67dB(A) and 67-78dB(A) at 1 m
• Loop powered
• Synchronization of ‘alert’ and ‘evacuate’ tones
• Synchronization of flash
• Flash rate of once per second
• Group addressing
• Unique acoustic and visual indicator self test
The XP95A Sounder Visual Indicator Base is only certified as a base to which a suitable detector can be installed. It must not be used as an evacuation or alarm notification device. The device is suitable for indoor use only.
- About
-
The XP95A Sounder Beacon Base is a loop-powered sounder and beacon combined with a standard Intelligent Mounting Base. It is used to signal a fire alarm in enclosed areas. The Sounder Beacon Base can be used either with a detector fitted or with a cap for operation as a stand-alone alarm device.
45681-525 – XP95A Sounder Visual Indicator Base – Yellow LED
45681-526 – XP95A Sounder Visual Indicator Base – Red LED
- Data Sheet
- Specs
-
• Two volume ranges 53-67dB(A) and 67-78dB(A) at 1 m
• Loop powered
• Synchronization of ‘alert’ and ‘evacuate’ tones
• Synchronization of flash
• Flash rate of once per second
• Group addressing
• Unique acoustic and visual indicator self test - Architects
-
The XP95A Sounder Visual Indicator Base is only certified as a base to which a suitable detector can be installed. It must not be used as an evacuation or alarm notification device. The device is suitable for indoor use only.