The DAPB-100 is a distributed audio power booster that provides an additional 100 watts of audio output power to any new or existing voice evacuation system.
DAPB-100 - Distributed Audio Power Booster
Distributed Module Placement
The DAPB-100 is designed to work with any manufacturer’s voice evacuation control panel including the VECP series. Each DAPB-100 also provides an additional four Class A or Class B 25 Vrms supervised speaker circuits with an option for 70 Vrms with addition of a supplemental transformer.
Highly Survivable
Whether protecting a single floor or a an entire campus building, FxIP modules will continue to process local events in the event of a network communication failure. In addition, because of it’s isolation, the module will never go down for routine system maintenance in other sections of the system.
The DAPB-100 is designed to work with any manufacturer’s voice evacuation control panel including the VECP series. Each DAPB-100 also provides an additional four Class A or Class B 25 Vrms supervised speaker circuits with an option for 70 Vrms with addition of a supplemental transformer.
- DAPB-100
- SIG-3-REL
- SIG-70V-XFMR
Inputs
Activation Voltage Polarity Reversal, Supervised, 9-30Vdc or Contact Closure, Supervised, 10K EOLR
Audio 25 Vrms Speaker Circuit
25K Impedance, 0.025 W loading
or
70 Vrms Speaker Circuit
70K Impedance, 0.07 W loading
Outputs
Audio 100 W; 25 Vrms (70 Vrms Optional)
Speaker circuits 1; power-limited to 60 W
3; power-limited to 25 W each with total power not exceeding 100 W
10 K Ohm EOLR continuously monitored
Indicators
LED power (green)
active (red)
system fault (yellow)
LED bar graph audio level; yellow 4-segment
Power Supply
Primary Power 120 Vac, 60 Hz; 5 A nominal
Internal Power Supply 24 Vdc regulated
External Power Supply 24 Vdc regulated; Listed for Fire Alarm Use
Battery Backup – Standby Power
Use 24 Vdc, 10 AH battery for 24 hour normal operation and 15 minute operation in alarm with loss of primary AC power
Use larger capacity battery for longer operation with loss of primary AC power
DAPB-100 is extremely easy to add to a new or existing fire alarm/voice evacuation system and interfaces directly with both the voice evacuation control panel and any addressable or conventional FACP as needed. The DABP-100 has its own power supply with built-in battery charger. The audio input is provided by connection to an existing 25 Vrms or 70 Vrms speaker circuit. For activation, the DAPB-100 connects to a standard reverse polarity NAC circuit and/or a supervised dry contact trigger.
- About
-
The DAPB-100 is designed to work with any manufacturer’s voice evacuation control panel including the VECP series. Each DAPB-100 also provides an additional four Class A or Class B 25 Vrms supervised speaker circuits with an option for 70 Vrms with addition of a supplemental transformer.
- DAPB-100
- SIG-3-REL
- SIG-70V-XFMR
- Data Sheet
- Specs
-
Inputs
Activation Voltage Polarity Reversal, Supervised, 9-30Vdc or Contact Closure, Supervised, 10K EOLR
Audio 25 Vrms Speaker Circuit
25K Impedance, 0.025 W loading
or
70 Vrms Speaker Circuit
70K Impedance, 0.07 W loadingOutputs
Audio 100 W; 25 Vrms (70 Vrms Optional)
Speaker circuits 1; power-limited to 60 W
3; power-limited to 25 W each with total power not exceeding 100 W
10 K Ohm EOLR continuously monitored
Indicators
LED power (green)
active (red)
system fault (yellow)
LED bar graph audio level; yellow 4-segmentPower Supply
Primary Power 120 Vac, 60 Hz; 5 A nominal
Internal Power Supply 24 Vdc regulated
External Power Supply 24 Vdc regulated; Listed for Fire Alarm UseBattery Backup – Standby Power
Use 24 Vdc, 10 AH battery for 24 hour normal operation and 15 minute operation in alarm with loss of primary AC power
Use larger capacity battery for longer operation with loss of primary AC power - Architects
-
DAPB-100 is extremely easy to add to a new or existing fire alarm/voice evacuation system and interfaces directly with both the voice evacuation control panel and any addressable or conventional FACP as needed. The DABP-100 has its own power supply with built-in battery charger. The audio input is provided by connection to an existing 25 Vrms or 70 Vrms speaker circuit. For activation, the DAPB-100 connects to a standard reverse polarity NAC circuit and/or a supervised dry contact trigger.