The AC-100 Cabinet supports from 1-2 remote ALM modules and/or remote copper/fiber switches
AC-100
Distributed Module Placement
The AC-100 cabinetry facilitates the placement of ALM modules, ESU or Fiberoptic switches out at point of use. This eliminates long SLC or NAC wiring runs back to a central control panel.
Highly Survivable
Whether protecting a single floor or a an entire campus building, a single remote ALM module will continue to process local events in the event of a network communication failure. In addition, because of it’s isolation, the module will never go down for routine system maintenance in other sections of the system.
The AC-100 provides cabinetry to remotely mount IP addressable SLC and NAC circuits along with Ethernet switches.
Most Fire Alarm Control panels require either long wiring runs back to a central location or a network of complete fire alarm systems strung together throughout a complex in order to provide adequate fire protection.
Harding has broken the technological barrier by developing a method to distribute only those pieces of the system required for maximum protection.
Distributed IP technology puts controls out at the point of use, minimizes wiring runs and increases overall system survivability.
Part Number Specifications For PC Boards:
| AC-100P-1-AAA-BBB | ||
| P | Paint Option | Cabinet Color |
| AAA | Module Slot 1
(lower slot) – ALM3-IP-ai |
Addressable Loop Module (ALM3-IP)
– Addressable Loops: a – IOC Circuits: i Ethernet Switch Unit |
| BBB | Module Slot 2
(upper slot) – ALM3-IP-ai |
Addressable Loop Module (ALM3-IP)
– Addressable Loops: a – IOC Circuits: i |
| ETP3 accommodation | An ETP3 is included if either module slot contains an ALM3-IP | |
Available PC Boards:
| MODEL NUMBER | DESCRIPTION |
| ESU3-IP | Ethernet Switch Unit (Unmanaged 8 port) |
| ALM3-IP-22 | Addressable Loop Module (2 Loops, 2 Integral Outputs) c/w APU3 |
| ALM3-IP-20 | Addressable Loop Module (2 Loops, 0 Integral Outputs) c/w APU3 |
| ALM3-IP-12 | Addressable Loop Module (1 Loop, 2 Integral Outputs) c/w APU3 |
| ALM3-IP-10 | Addressable Loop Module (1 Loop, 0 Integral Outputs) c/w APU3 |
| ALM3-IP-02 | Addressable Loop Module (0 Loops, 2 Integral Outputs) c/w APU3 |
| ETP3 | Ethernet Transient Protection board (2 port) |
Part Number Specifications For Fiber Switches:
| AC-100P-2-ABC-DEF | ||
| P | Paint Option | Cabinet Color |
| ABC-DEF | Ethernet Switch | See below |
| ETP3 accommodation | Two ETP3 boards are included | |
| PTP3 accommodation | A PTP3 is included | |
Available Fiber Switches:
| MODEL NUMBER | DESCRIPTION |
| EIS6-100T-FT2 | Four-port 100BASE-TX/two-port 100BASE-FX (multimode) switch w/ST connectors |
| EIS6-100T-FCS2 | Four-port 100BASE-TX/two-port 100BASE-FX (single-mode) switch w/SC connectors |
| ETP3 | Two ETP3 modules are included |
| PTP3 | One PTP3 module is included |
The contractor shall furnish and install, where indicated on the plans, remotely located IP-Addressable SLC and NAC circuits to distribute fire alarm system processing power, to eliminate long wiring runs back to a centrally located control panel and to increase overall system survivability. Remote SLC and NAC circuit modules shall be fully incorporated into the FxIP Fire Control system by simple CAT 5 connection. Connections shall be fully supervised, transient protected and monitored for ground faults. The combination of the IP Module and AC-100 cabinet shall be UL/ULC listed and UL/ULC listed as compatible with the Harding network fire controls. The remote cabinet shall be Harding part number AC-100 and remote IP modules shall be Harding part number(s) ALM3-IP-10, ALM3-IP-02, ALM3-IP-12, ALM3-IP-22, ALM3-IP-20, ESU3-IP, EIS6-100T-FT, EIS6-100T-FCS, ETP3, PTP3.
- About
-
The AC-100 provides cabinetry to remotely mount IP addressable SLC and NAC circuits along with Ethernet switches.
Most Fire Alarm Control panels require either long wiring runs back to a central location or a network of complete fire alarm systems strung together throughout a complex in order to provide adequate fire protection.
Harding has broken the technological barrier by developing a method to distribute only those pieces of the system required for maximum protection.
Distributed IP technology puts controls out at the point of use, minimizes wiring runs and increases overall system survivability.
- Data Sheet
- Specs
-
Part Number Specifications For PC Boards:
AC-100P-1-AAA-BBB P Paint Option Cabinet Color AAA Module Slot 1 (lower slot)
– ALM3-IP-ai
– ESU3-IPAddressable Loop Module (ALM3-IP) – Addressable Loops: a
– IOC Circuits: i
Ethernet Switch Unit
BBB Module Slot 2 (upper slot)
– ALM3-IP-ai
Addressable Loop Module (ALM3-IP) – Addressable Loops: a
– IOC Circuits: i
ETP3 accommodation An ETP3 is included if either module slot contains an ALM3-IP Available PC Boards:
MODEL NUMBER DESCRIPTION ESU3-IP Ethernet Switch Unit (Unmanaged 8 port) ALM3-IP-22 Addressable Loop Module (2 Loops, 2 Integral Outputs) c/w APU3 ALM3-IP-20 Addressable Loop Module (2 Loops, 0 Integral Outputs) c/w APU3 ALM3-IP-12 Addressable Loop Module (1 Loop, 2 Integral Outputs) c/w APU3 ALM3-IP-10 Addressable Loop Module (1 Loop, 0 Integral Outputs) c/w APU3 ALM3-IP-02 Addressable Loop Module (0 Loops, 2 Integral Outputs) c/w APU3 ETP3 Ethernet Transient Protection board (2 port) Part Number Specifications For Fiber Switches:
AC-100P-2-ABC-DEF P Paint Option Cabinet Color ABC-DEF Ethernet Switch See below ETP3 accommodation Two ETP3 boards are included PTP3 accommodation A PTP3 is included Available Fiber Switches:
MODEL NUMBER DESCRIPTION EIS6-100T-FT2 Four-port 100BASE-TX/two-port 100BASE-FX (multimode) switch w/ST connectors EIS6-100T-FCS2 Four-port 100BASE-TX/two-port 100BASE-FX (single-mode) switch w/SC connectors ETP3 Two ETP3 modules are included PTP3 One PTP3 module is included - Architects
-
The contractor shall furnish and install, where indicated on the plans, remotely located IP-Addressable SLC and NAC circuits to distribute fire alarm system processing power, to eliminate long wiring runs back to a centrally located control panel and to increase overall system survivability. Remote SLC and NAC circuit modules shall be fully incorporated into the FxIP Fire Control system by simple CAT 5 connection. Connections shall be fully supervised, transient protected and monitored for ground faults. The combination of the IP Module and AC-100 cabinet shall be UL/ULC listed and UL/ULC listed as compatible with the Harding network fire controls. The remote cabinet shall be Harding part number AC-100 and remote IP modules shall be Harding part number(s) ALM3-IP-10, ALM3-IP-02, ALM3-IP-12, ALM3-IP-22, ALM3-IP-20, ESU3-IP, EIS6-100T-FT, EIS6-100T-FCS, ETP3, PTP3.