For early detection of smoke and products of combustion present in air moving through HVAC ducts in Commercial, Industrial, and Residential applications
Addressable Duct Detectors
Distributed Architecture
All FC-250 modules operate independently. There is no central operating system, no central point of failure. Processing power is distributed throughout the campus, increasing system survivability, eliminating home-run wiring costs while decreasing downtime due to system maintenance.
Highly Survivable
Since NAC’s and SLC’s are grouped on the same module and events are processed locally, ALM modules will perform local operations even if network communication has been severed. Distributed modules also minimize campus-wide downtime by restricting maintenance to the local module.
Duct Detectors connect to the ALM3-IP SLC loop monitored and controlled by the FxIP fire control system. The Duct Detectors are addressed through the use of a patented binary programming card that locks securely into the detectors base within the Duct Detector housing.
- SL-DAA-P – Addressable 2 Wire Photoelectric Duct Detector
- SL-DA4R-P – Addressable 4 Wire Photoelectric Duct Detector
- SL-DAA-N – Addressable 2 Wire Ionization Duct Detector
- SL-DA4R-N – Addressable 4 Wire Ionization Duct Detector
- SL-701KIT – Carbon Monoxide Duct Detector Kit with FAST TUBES and Remote Accessories
- High Rating, Built-in Relay
- Listed for velocities between 100-4000 ft./min
- Listed for high- temperature applications
- Patent pending “No-Tools Required” front or rear loading and removing sampling/exhaust tubes
- Patent pending “Test Port Valve” allows for aerosol smoke testing without cover removal
- Clear cover fitted with four captive “No-Tools Required” thumbscrews
- Instantaneous cover removal trouble indication
- Vertical terminal block for easier wiring
- External mounting tabs do not require cover removal to install
- Duct wall gaskets on back of enclosure are pre-installed
- Large terminal connection screws
- Compatible with the WP-2000 weatherproof enclosure
The contractor shall furnish and install, where indicated on the plans, ionization or photoelectric type duct detectors for the control of air handling units by the Fire Alarm control. The addressable analog duct detector will contain the patented XPERT programming card for ease of addressing. The addressable analog doctor shall also be capable of handling air velocities of 100 to 4000 feet per second, the detector head shall contain no additional screens or filters, a method of smoke testing the detector without removing the duct detector cover must be provided, cover and sampling tube or installation shall not require the use of tubes and sampling tubes must be capable of installation or removal from the front and rear of the detector for inspection and testing. The addressable analog duct detector shall be UL/ULC listed and UL/ULC listed as compatible with Harding network fire controls. The analog addressable duct detector shall be the model SL-DAA-P (photoelectric), SL-DAA-N (ion) (two-wire) and SL-DA4R-P (photoelectric), SL-DA4R -N (ion) (four wire).
- About
-
Duct Detectors connect to the ALM3-IP SLC loop monitored and controlled by the FxIP fire control system. The Duct Detectors are addressed through the use of a patented binary programming card that locks securely into the detectors base within the Duct Detector housing.
- SL-DAA-P – Addressable 2 Wire Photoelectric Duct Detector
- SL-DA4R-P – Addressable 4 Wire Photoelectric Duct Detector
- SL-DAA-N – Addressable 2 Wire Ionization Duct Detector
- SL-DA4R-N – Addressable 4 Wire Ionization Duct Detector
- SL-701KIT – Carbon Monoxide Duct Detector Kit with FAST TUBES and Remote Accessories
- Data Sheet
- Specs
-
- High Rating, Built-in Relay
- Listed for velocities between 100-4000 ft./min
- Listed for high- temperature applications
- Patent pending “No-Tools Required” front or rear loading and removing sampling/exhaust tubes
- Patent pending “Test Port Valve” allows for aerosol smoke testing without cover removal
- Clear cover fitted with four captive “No-Tools Required” thumbscrews
- Instantaneous cover removal trouble indication
- Vertical terminal block for easier wiring
- External mounting tabs do not require cover removal to install
- Duct wall gaskets on back of enclosure are pre-installed
- Large terminal connection screws
- Compatible with the WP-2000 weatherproof enclosure
- Architects
-
The contractor shall furnish and install, where indicated on the plans, ionization or photoelectric type duct detectors for the control of air handling units by the Fire Alarm control. The addressable analog duct detector will contain the patented XPERT programming card for ease of addressing. The addressable analog doctor shall also be capable of handling air velocities of 100 to 4000 feet per second, the detector head shall contain no additional screens or filters, a method of smoke testing the detector without removing the duct detector cover must be provided, cover and sampling tube or installation shall not require the use of tubes and sampling tubes must be capable of installation or removal from the front and rear of the detector for inspection and testing. The addressable analog duct detector shall be UL/ULC listed and UL/ULC listed as compatible with Harding network fire controls. The analog addressable duct detector shall be the model SL-DAA-P (photoelectric), SL-DAA-N (ion) (two-wire) and SL-DA4R-P (photoelectric), SL-DA4R -N (ion) (four wire).