The UXB3 USB Connection Board provides two user accessible USB type A connectors for USB keyboard and USB flash drive connections. The UXB3 connects to the VPM3-IP or SDM3-IP via a short ribbon cable
USB Expansion Board
Distributed Module Placement
The SDM3 connector connects the UXB3 to the SDM3 board via a short ribbon cable. It provides data and power to the swing panel’s front keyboard and configuration USB ports.
Highly Survivable
Whether protecting a single floor or a an entire campus building, a single remote ALM module will continue to process local events in the event of a network communication failure. In addition, because of it’s isolation, the module will never go down for routine system maintenance in other sections of the system.
The UXB3 mounts onto the inside of the swing panel via three #4-40 x ½ inch threaded standoffs. The standoffs themselves are first mated with the four #4-40 mounting studs on the rear of the swing panel. The board is secured to the standoffs with three #4-40 lock washers / hex nuts.
- UBX3 – USB Expansion Board
Please refer to datasheet for further information
Please refer to datasheet for further information
- About
-
The UXB3 mounts onto the inside of the swing panel via three #4-40 x ½ inch threaded standoffs. The standoffs themselves are first mated with the four #4-40 mounting studs on the rear of the swing panel. The board is secured to the standoffs with three #4-40 lock washers / hex nuts.
- UBX3 – USB Expansion Board
- Data Sheet
- Specs
-
Please refer to datasheet for further information
- Architects
-
Please refer to datasheet for further information